What Does RR Zoning Mean?

RR zoning means rural residential: a district for homes on large lots outside town centers, usually with room for gardens, some farm animals and outbuildings. The two R's stand for rural and residential. A number after it, as in RR-1, RR-5 or RR-10, usually gives the minimum lot size in acres.

"RR", "R-R" and "RR zone" all refer to the same kind of district. Riverside County, California writes it R-R, while Lane County, Oregon writes RR-5.

What does RR zoning mean?

RR zoning means land set aside mainly for houses in a rural setting, on lots much larger than a typical suburban lot. It is the most spread-out step in residential zoning, and it often sits between suburban neighborhoods and farmland.

Counties use it more than cities, because most rural land lies outside city limits. On a county map, RR often works as a buffer, with suburban neighborhoods on one side and working farms on the other.

The number after RR is usually acres. RR-1 means a one acre minimum lot in Lyon County, Franklin County and Brevard County, Florida. In Lane County, RR-5 means new lots must be at least 5 acres, and Deschutes County, Oregon requires 10 acres in RR-10.

What RR zoning means in different counties

Every county sets its own RR rules, and the minimum lot size ranges from half an acre to ten acres. Each row below comes from that county's zoning code or planning department:

PlaceDistrict nameWhat it allows (short)
Riverside County, CAR-R Rural ResidentialHomes on lots of at least half an acre, 80 ft average width. Cattle, horses, sheep, goats and other farm stock up to five per acre.
Brevard County, FLRR-1 Rural ResidentialHomes on lots of at least one acre.
Lyon County, NVRR-1 Rural Residential, 1 Acre MinimumSingle family homes on lots of at least one acre.
Franklin County, WARR-1 Rural ResidentialHomes on lots of at least one acre.
Lane County, ORRR-5 Rural ResidentialRural homes. New lots must be at least 5 acres. The same zone is also mapped as RR-1, RR-2 and RR-10.
Deschutes County, ORRR-10 Rural ResidentialSingle family homes, ADUs, farming, small-scale horse stables and limited home businesses. 10 acres for a new standard lot.

The table shows how far apart RR districts can be. Riverside County's R-R allows a home on half an acre. Deschutes County's RR-10 needs twenty times that for a new lot.

The number in the name is the best clue. In most of these counties it is the acreage, so RR-1, RR-5 and RR-10 tell you the minimum lot size at a glance. Riverside's R-R has no number, so you have to read its code to learn the half acre rule.

So what does RR usually mean? One house per large lot in a rural area, often with farm animals allowed, and a minimum lot size somewhere between half an acre and ten acres, with one to five acres the most common in these codes.

What can you build on RR zoning?

On RR land you can usually build one single family home plus the barns, shops, garages and sheds that go with rural living. Many counties also allow an accessory dwelling unit, and Deschutes County lists ADUs as an outright use in RR-10.

Common RR uses include:

  • A main house, often with a detached garage or shop
  • Barns, stables and animal shelters
  • Gardens, orchards and small-scale farming
  • A small home business, within the county's limits
  • Churches, schools and similar uses, often with a conditional use permit

Buyers of rural land often ask about a barndominium or a manufactured home. Both depend on the county's dwelling rules, not just the RR label, so read the use list for your district.

Big lots still have setbacks. Deschutes County, for example, requires a front setback of 20 feet from a local street and 50 feet from an arterial. The setback calculator shows how much of a lot is left to build on.

Can you have animals on RR zoning?

Usually yes. Allowing farm animals on homesites is one of the main reasons RR districts exist, but each county caps the number.

Riverside County's R-R zone allows cattle, horses, sheep, goats and other farm stock at up to five animals per acre, under its Ordinance No. 348. The same ordinance allows more sheep or goats per acre than larger stock and sets separate limits for hogs. Deschutes County allows small-scale horse stables outright in RR-10.

Poultry often has its own rule. Riverside County's ordinance allows up to 12 hens on R-R lots of 20,000 to 39,999 square feet, and up to 50 hens and 10 roosters on lots of 40,000 square feet or more.

Commercial operations are a different matter. A large boarding stable or a feedlot usually belongs in an agricultural zone instead.

What is the difference between RR and R-1 zoning?

RR zoning is for homes on large rural lots, while R-1 is for single family homes on suburban or city lots. Both usually allow one house per lot, but the lot sizes and the rural uses are very different.

RR zoningR-1 zoning
Typical settingRural land, often outside city limitsSuburban and city neighborhoods
Lot sizeHalf an acre to 10 acres in the counties aboveOften several thousand sq ft (Los Angeles R1 needs 5,000 sq ft)
Farm animalsOften allowed, with limits per acreMore limited, and often not allowed on small lots
Water and sewerOften wells and septic, which can affect lot sizeUsually city water and sewer
Who writes the rulesMostly countiesCities and counties

If you are weighing a rural lot against a lot in town, the R1 zoning guide covers the suburban side, including when horses are allowed on R-1 land.

What is the difference between RR and agricultural or AR zoning?

Agricultural zoning puts farming first and allows houses as part of the farm, while RR zoning puts homes first and allows some farming alongside them. Lot sizes are a good tell: farm zones often require 10 to 40 acres, while the RR districts above range from half an acre to 10 acres.

AR, or agricultural residential, sits between the two. It reads like a farm zone but often works like rural residential, with homes on a few acres and room for animals. Some counties use AR to mean agricultural rural instead, which is a farm-first district.

The practical difference shows up next door. In a farm district, a working farm's smells, noise and equipment are part of the expected use. In RR, the neighbors are mainly other homeowners, and large operations are more likely to be limited. For more on the farm side, see agricultural zoning and what A-1 zoning allows.

Washington uses a twist worth knowing. Snohomish and Clark counties call their rural five acre zones R-5 rather than RR, even though they work much like an RR-5 district.

Can you split RR land into smaller lots?

Only down to the zone's minimum lot size, unless the county offers a cluster option. Deschutes County, for example, sets 10 acres per lot for a standard land division in RR-10, so a 15 acre parcel there cannot be split into two standard lots.

Cluster or planned developments are the main exception. Deschutes allows extra density and smaller lots through a planned or cluster development, usually in exchange for keeping the rest of the land open.

Before buying with a split in mind, find the parcel on the county zoning map, confirm the exact RR district, and ask the planning office whether water, septic and road access rules allow the lots you want.

Common misconceptions about RR zoning

One misconception is that RR means you can farm without limits. RR is residential first, and counties cap animal numbers and restrict larger commercial operations.

Another is that RR always means five acres. RR-5 does, but RR-1 is one acre, RR-10 is ten, and Riverside's R-R allows half acre lots.

A third is that rural land has no building rules. RR lots still need permits, setbacks, and in many counties approved septic and water before a house can go in.

RR zoning FAQ

What does RR zoning mean?

RR zoning means rural residential. It is a district for homes on large rural lots, usually with room for gardens, outbuildings and some farm animals. The minimum lot size is set by the county and often shown by the number after RR.

What does RR-5 zoning mean?

RR-5 usually means rural residential with a 5 acre minimum lot size. In Lane County, Oregon, new lots in the RR-5 zone must be at least 5 acres.

What does RR-1 zoning mean?

RR-1 usually means rural residential with a one acre minimum lot. Lyon County, Nevada, Franklin County, Washington and Brevard County, Florida all use RR-1 that way.

Can you have horses on RR zoned land?

Usually yes, within limits. Riverside County's R-R zone allows horses and other farm stock at up to five animals per acre, and Deschutes County allows small-scale horse stables in RR-10.

Is RR zoning the same as agricultural zoning?

No. Agricultural zoning puts farming first, often on lots of 10 to 40 acres. RR zoning puts homes first on smaller rural lots, with farming and animals allowed as secondary uses.

Other residential zoning codes

See the full guide to residential zoning, or search for your city's zoning map to check how a specific property is zoned.