What Is A1 Zoning? Uses, Acreage and Real County Rules

A1 zoning usually means agricultural: land meant for farming, ranching and a farmhouse, with a minimum lot size that ranges from 5,000 square feet to 40 acres depending on the county. The "A" stands for agricultural, and the "1" marks the first agricultural district in that county's code, often the general or lightest one.

A1, A-1 and A 1 are the same district written three ways. It shows up mostly in county codes, and the county that drew the map decides what it allows. At least one big city, Phoenix, uses the same letters for land that has nothing to do with farming.

What does A1 zoning mean?

A1 zoning means the land is in an agricultural district where farming is the main intended use and homes are allowed around it. It is one of several districts under agricultural zoning, which also covers A-2, AG, AE and AR codes.

Counties write A-1 to do one of two jobs. Some use it to protect big working farms. Tazewell County, Illinois calls its A-1 the Agricultural Preservation District and says non-farm uses, "such as residential home sites on smaller tracts of land, are discouraged." Others use it for small farms mixed with country homes. Kern County, California's A-1 Limited Agriculture district is for "estate-type residential development, agricultural uses and other compatible uses."

Both are called A-1. The minimum lot in Tazewell's is 40 acres. In Kern's it is 2.5.

What A1 zoning means in different counties

The quickest way to see how much A-1 varies is to put real codes side by side. Every row below comes from that county's or city's own zoning code or planning department.

PlaceDistrict nameWhat it allows
Los Angeles County, CAA-1 Light AgricultureHomes, crops, greenhouses, and cattle, horses, sheep, goats and poultry. Base lot 5,000 sq ft, but animal uses need 1 to 5 acres.
City of Los Angeles, CAA1 AgricultureOne-family homes, parks, golf courses and agricultural uses. Minimum lot 5 acres and 300 ft wide.
Kern County, CAA-1 Limited AgricultureEstate homes with farming. One main house per lot, new lots at least 2.5 acres, one large animal per quarter acre. No residential subdivisions.
Orange County, FLA-1 Citrus RuralA single family home on half an acre (21,780 sq ft). A mobile home used as a residence needs 2 acres.
Jefferson County, COA-1 Agricultural-OneA home, barns, general farming, horses and greenhouses. Minimum lot 5 acres.
Douglas County, COA-1 Agricultural OneLarge farms and ranches. Minimum lot 35 acres. Smaller lots are limited to the uses of the residential district they match in size.
Will County, ILA-1 AgriculturalFarming and livestock with no zoning cap on animal numbers. Minimum lot 10 acres with 300 ft of frontage.
Tazewell County, ILA-1 Agricultural PreservationA home on 40 acres, or a 1 to 5 acre home lot split from a parent parcel of at least 40 acres if the site meets extra tests.
City of Pueblo, COA-1 Agricultural OneFarming, ranching, one-family and manufactured homes. Minimum lot 40 acres for a house, 80 acres for a duplex.
City of Phoenix, AZA-1 Light IndustrialNot a farm district at all. Phoenix uses A-1 for light industry.

Three patterns stand out. First, the minimum lot runs from 5,000 sq ft in Los Angeles County to 40 acres in Tazewell County and Pueblo, so "A-1" alone tells you almost nothing about how many homes the land can hold. Second, the City of Los Angeles needs 5 acres for A1 while Los Angeles County's A-1 starts at 5,000 sq ft, in the same metro area. Third, Phoenix flips the meaning entirely. Its A-1 is a light industrial district, closer to M-1 zoning elsewhere. If you searched "A-1 zoning Phoenix," you are looking at industrial land.

So the honest summary is this: A-1 usually means a county's general agricultural district, with farming allowed by right and one house per lot, but the acreage and the animal limits are set locally and differ by a factor of hundreds.

What can you build on A1 zoning?

On most A-1 land you can build one house plus the barns, sheds and other buildings that support farming. Jefferson County, Colorado's list is typical: a single family dwelling, barn, stable, silo, corral, pens and runs are all allowed in A-1.

Other uses often allowed by right in A-1 districts:

  • Crops, orchards, hay, nursery stock and tree farming
  • Greenhouses, as long as what you sell is grown on the property
  • Roadside stands for your own produce
  • Beekeeping, and in some counties poultry hatcheries and dairy farms

Pueblo's A-1 goes further and lists a wedding facility, a guest ranch and a farmers market as uses by right. Other codes ask for more review: Tazewell County lists banquet facilities as a special use in its A-1.

What you usually can't build is a subdivision. Kern County bans final map residential subdivisions in A-1 outright, and Will County's 10-acre minimum keeps new lots large.

Can you build a house on A1 zoning?

Yes, in most counties you can build one single family home on an A-1 lot, as long as the lot meets the district's minimum size. Kern County caps it at one principal dwelling per legal lot. Douglas County, Colorado allows a home by right on A-1 parcels of 35 acres or more.

The catch is the lot size. Before you buy, check:

  1. Whether the parcel meets the current minimum. Jefferson County only lets you use an undersized, unplatted A-1 parcel if it existed in its current shape before March 6, 1972 and is at least one acre.
  2. Whether a small home lot can be split off. Tazewell County allows a 1 to 5 acre home lot, but only from a parent parcel of at least 40 acres and only on sites that pass extra tests, such as sitting at least half a mile from a livestock feeding operation.
  3. Setbacks. Rural setbacks are big. Kern County's A-1 front setback is 55 ft from the centerline of a local street and 80 ft from a major highway. The setback calculator shows what is left to build on.
  4. Whether the house type counts. Orange County, Florida allows a site-built home on half an acre in A-1 but requires 2 acres for a manufactured or mobile home used as a residence.

How many acres do you need for A1 zoning?

There is no standard. In the codes above, the A-1 minimum lot runs from 5,000 sq ft in Los Angeles County to 40 acres in Tazewell County and Pueblo, with 2.5, 5, 10 and 35 acres in between.

The minimum matters more than the name, because it decides how many homes the land can ever hold. On lot size alone, a 20-acre parcel in Will County's A-1 could be split into two lots. The same 20 acres in Douglas County's A-1 is already below the 35-acre minimum and can't be split at all.

Can you have animals on A1 zoning?

Yes. Livestock is allowed in nearly every A-1 district, with limits set by lot size and animal counts:

  • Will County, Illinois sets no zoning limit on the number of animals in A-1.
  • Kern County allows one horse, cow, goat, hog, sheep or similar animal per quarter acre of lot area.
  • Jefferson County applies a cap only on undersized lots: 9,000 sq ft of open area for the first large animal, 6,000 sq ft for each one after, and no more than 4 per acre.

Los Angeles County ties it to acreage: animal uses in A-1 need 1 to 5 acres depending on the number and type of animals.

What is the difference between A1 and A2 zoning?

A-1 is usually the lighter or more general farm district, and A-2 zoning is either a heavier farm district or the same farming with a different lot size. Which way it goes depends on the county.

PlaceA-1A-2
Los Angeles County, CALight Agriculture, 5,000 sq ft base lotHeavy Agriculture, adds dairies, kennels and feed lots, 10,000 sq ft base lot
City of Los Angeles, CA5-acre minimum lotSame uses, 2-acre minimum lot
Jefferson County, CO5-acre minimum lotSame permitted uses, 10-acre minimum lot
Tazewell County, ILPreservation district, 40 acres for a homeGeneral agriculture near growth, 10 acres for a home

Notice that A-2 is the bigger lot in one county and the smaller lot in the next. Never assume the higher number means more land or more intensity.

What is the difference between A1 and AR zoning?

A-1 puts farming first, while AR (agricultural residential) puts rural homes first with some farming allowed. In practice the gap is often about lot size and how many homes a county wants.

The sizes don't always line up the way you would guess. In Orange County, Florida, A-1 allows a home on half an acre, while the Agricultural-Residential (A-R) district needs 2.5 acres (108,900 sq ft) and a 270 ft wide lot. There, the "residential" district is the one with the bigger lots. In the City of Los Angeles, the RA Suburban zone allows limited agricultural uses on 17,500 sq ft lots, far smaller than the 5 acres A1 requires there. If a parcel is zoned AR, the closest match elsewhere is often rural residential zoning.

Can A1 zoning be changed?

Yes, through a rezoning application to the county, but taking land out of A-1 for homes or business is one of the harder rezonings to win. Planning staff review the request against the comprehensive plan, and the planning commission and county board hold public hearings before voting.

Common misconceptions about A1 zoning

The biggest one is that A-1 means the same thing everywhere. It doesn't. A-1 is 5,000 sq ft in one California county and 2.5 acres in the next, and in Phoenix it is industrial land.

Another is that A-1 land can always hold a house. A parcel below the minimum may be unbuildable, or limited to the uses of a residential district its size, as in Douglas County.

The fix for both is the same: find your county's zoning map, confirm the district with this guide to reading a zoning map, then read that county's A-1 section for lot size, houses and animals. For an in-town comparison, R-1 zoning is the single-family district most cities use.

A1 zoning FAQ

What does A1 zoning mean?

A1 or A-1 zoning usually means a county's first or general agricultural district. It allows farming, livestock and one house per lot, with a minimum lot size set by the county that can range from 5,000 sq ft to 40 acres.

Can you build a house on A1 zoning?

Usually, yes. Most A-1 districts allow one single family home per lot if the lot meets the minimum size. Smaller parcels may be unbuildable unless they existed before the current rules.

How many acres is A1 zoning?

It depends on the county. Real A-1 minimums include half an acre in Orange County, Florida, 2.5 acres in Kern County, California, 10 acres in Will County, Illinois and 35 acres in Douglas County, Colorado.

Is A1 zoning in Phoenix agricultural?

No. The City of Phoenix uses A-1 for its Light Industrial district and A-2 for its Industrial district. Its semi-rural farm and home district is S-1 Ranch or Farm Residence.

Can you keep horses on A1 zoning?

In most counties, yes. Horses and other livestock are allowed in A-1, though some counties limit the number by lot area, such as one large animal per quarter acre in Kern County.

Other agricultural zoning codes

See the full guide to agricultural zoning, or search for your city's zoning map to check how a specific property is zoned.