A2 zoning usually means a county's second agricultural district. Depending on the county, it either allows heavier farm uses than A-1, such as dairies and feed lots, or allows the same farming on a different minimum lot size. The "A" stands for agricultural and the "2" simply marks it as the second agricultural district in that code.
A2, A-2 and A 2 all mean the same district. The number does not carry a fixed meaning, which is why A-2 is harder to read than most zoning codes. In one county it is the heavy farm district. In the next it is the larger-lot version of A-1, and in another it is the smaller-lot version. One major city even uses A-2 for industry.
A2 zoning means the land sits in an agricultural district that the county ranks second after A-1. It belongs to the family of agricultural zoning districts, and like the others it is written mostly by counties, since most farmland is outside city limits.
What makes A-2 different from A-1 falls into one of four patterns:
The only way to know which one you have is to read the county's code.
Here is how eight real jurisdictions define A-2. Each row comes from that county's or city's own zoning code or planning department.
| Place | District name | What it allows |
|---|---|---|
| Los Angeles County, CA | A-2 Heavy Agriculture | All A-1 uses plus animal hospitals, dairies, dog kennels, livestock feed lots, manure spreading and oil wells. Base lot 10,000 sq ft, but animal and other uses need 1 to 10 acres. |
| City of Los Angeles, CA | A2 Agriculture | The same uses as A1 (homes, parks, agricultural uses) on a minimum lot of 2 acres and 150 ft wide. |
| Orange County, FL | A-2 Farmland Rural | A single family home on half an acre (21,780 sq ft). A mobile home used as a residence needs 2 acres. |
| Jefferson County, CO | A-2 Agricultural-Two | The same permitted uses as A-1, including a home, barns, farming and horses, on a minimum lot of 10 acres. |
| Will County, IL | A-2 Agricultural-Residential | Homes and livestock on lots of at least 2.5 acres, with one animal unit per acre. Closed to new rezonings. |
| Tazewell County, IL | A-2 Agricultural | Farming with limited non-farm homes. A house needs 10 acres. |
| City of Pueblo, CO | A-2 Agricultural Two | Farming, ranching and homes on 5 acres for a house, 10 acres for a duplex. |
| City of Phoenix, AZ | A-2 Industrial | Industrial district, the step above Phoenix's A-1 Light Industrial. Not farmland. |
The table shows all four patterns. Los Angeles County's A-2 is the heavy farm district. Jefferson County's allows the same farming on twice the land. The City of Los Angeles, Will County, Tazewell County and Pueblo all set a smaller lot minimum for A-2 than for their A-1, which makes A-2 the more residential of the two. Phoenix's A-2 is factory and warehouse land.
The honest summary: A-2 is usually a second farm district that allows homes, but whether it is "more" or "less" than A-1 depends entirely on the county.
The difference between A-1 and A-2 is either the intensity of farming allowed or the minimum lot size, and the direction changes from county to county. Compare the two side by side before assuming anything.
| Place | A-1 minimum lot | A-2 minimum lot | Main difference |
|---|---|---|---|
| Los Angeles County, CA | 5,000 sq ft | 10,000 sq ft | A-2 adds dairies, kennels and feed lots |
| City of Los Angeles, CA | 5 acres | 2 acres | Same uses, smaller A2 lots |
| Jefferson County, CO | 5 acres | 10 acres | Same permitted uses, bigger A-2 lots |
| Will County, IL | 10 acres | 2.5 acres | A-2 is agricultural-residential with an animal cap |
| Tazewell County, IL | 40 acres for a home | 10 acres for a home | A-1 preserves farmland, A-2 allows limited homes |
| City of Pueblo, CO | 40 acres | 5 acres | Same uses, smaller A-2 lots |
| Orange County, FL | Half an acre | Half an acre | Same lot rules, different district names |
Tazewell County spells out the logic. Its code says A-2 protects farmland that sits close to existing development, where pressure to build "makes these lands unsuitable for preservation according to the more restrictive regulations" of A-1. In other words, A-2 is the county's farm zone for land on the edge of town. For the A-1 side of the comparison, see A1 zoning.
On most A-2 land you can farm, keep livestock and build one home with barns and sheds, and in some counties you can also run a farm business that A-1 would not allow. The list depends on which pattern your county follows.
In a heavy agriculture A-2 like Los Angeles County's, the extra uses are the ones neighbors notice: dairies, animal hospitals, dog kennels, feed lots and manure spreading. A dog boarding facility is the kind of use that fits A-2 there but not A-1.
Pueblo's A-2 shows how broad a by-right list can get. It includes farming and ranching, a guest ranch, a commercial stable, a dog care facility, a contractor's yard and a wedding facility. Dairies, feedlots, a livestock market and a bed and breakfast need review first.
How much you can cover with buildings is a separate limit. Will County caps building coverage at 20% in both A-1 and A-2 and limits A-2 accessory buildings to 3,000 sq ft in total, while A-1 has no such cap. The lot coverage calculator turns a percentage like that into square feet for your lot.
Yes, in most counties one house per lot is allowed in A-2 if the lot meets the minimum size. Real minimums range from a 10,000 sq ft base lot in Los Angeles County to 10 acres in Tazewell County and Jefferson County.
A few details to check:
Yes. Livestock is allowed in A-2 almost everywhere it is a farm district, but A-2 can carry tighter animal limits than A-1 when it is the more residential district.
Will County is the clearest case. A-1 has no zoning limit on the number of animals. A-2 allows one animal unit per acre, so a 2.5-acre A-2 lot has a much lower ceiling than a 10-acre A-1 farm. In Los Angeles County it runs the other way: A-2 allows the larger operations, with animal uses needing 1 to 10 acres depending on the number and type of animals.
Sometimes, but some counties have closed A-2 to new rezonings. Will County, Illinois calls its A-2 a "grandfathered" zoning classification that is no longer available for rezonings. Land already zoned A-2 keeps it, but no new land can get it.
Orange County, Florida limits it by location instead. Inside its Urban Service Area, rezoning requests to A-1 or A-2 are allowed only for properties in a Rural Residential Enclave. Where rezoning is open, the process is a county application, a staff review against the comprehensive plan and public hearings.
The most common one is that A-2 means two-family. It doesn't. Two-family homes and duplexes are usually zoned R-2, while A-2 is agricultural in most places.
Another is that A-2 is always heavier than A-1. That is true in Los Angeles County, but in Jefferson County the two have the same permitted uses, and in Will County A-2 is the more residential district with stricter animal limits.
A third is that A-2 is farmland everywhere. In Phoenix, A-2 is the city's Industrial district, closer to industrial zoning than to anything rural.
To check a specific parcel, search for your county's zoning map, use this guide to finding a property on a zoning map to confirm the district, then read the county's A-2 section for lot size, homes and animals.
A2 or A-2 zoning usually means a county's second agricultural district. Depending on the county, it allows heavier farm uses than A-1 or the same farming on a different minimum lot size.
It varies. A-2 needs more land than A-1 in Jefferson County, Colorado (10 acres vs 5) and less in the City of Los Angeles (2 acres vs 5) and Will County, Illinois (2.5 acres vs 10).
No. A-2 is an agricultural district in most places. Two-family homes and duplexes are usually zoned R-2.
In Orange County, Florida, A-2 is the Farmland Rural District. A single family home needs a lot of at least half an acre, and a mobile home used as a residence needs 2 acres.
No. The City of Phoenix uses A-2 for its Industrial district and A-1 for Light Industrial. Its semi-rural farm and home district is S-1 Ranch or Farm Residence.
See the full guide to agricultural zoning, or search for your city's zoning map to check how a specific property is zoned.